Loc8tor Features
2 x Lightweight homing tags
32mm (Diam) x 6mm (D)



1 x Slimline directional handset
(H) 86mm x (W) 54mm x (D) 6mm
£66.99
Loc8tor’s NO.1 BESTSELLING Tracking Device
Our RF-based technology offers much greater accuracy than “Keyring Finders”, Bluetooth or GPS trackers.
Simply attach the lightweight (6 grams) tag to your key, bag, wallet, remote control, drone/model aircraft or whatever you want to protect and you can quickly locate it using the credit card-sized handset.
Activate the Handset and it sounds a series of beeps, with colour-coded lights to show you when you’re getting close – Red for far away, Amber for closer, and Green for really close.
NOTE: If purchasing for your cat or kitten, please purchase Tabcat
2 Years Manufacturer’s Warranty
30 Day Money Back Guarantee – (with clear adhesive seal, still applied to Tags)
333 in stock
32mm (Diam) x 6mm (D)
(H) 86mm x (W) 54mm x (D) 6mm
Weight | 0.12 kg |
---|
Currently, Loc8tor Lite products are only available online, through the official online store. We are currently working with a variety of retailers to make Loc8tor available in retail shops.
Yes, Loc8tor works on the 2.45GHz frequency band which can be used worldwide.
Remove the white plastic strip to activate battery. Then place the tag you wish to register close to, or on top of the handset - make sure it is the only active tag near to the handset. To register the tag to button 1, hold button 1 down for three seconds or until you hear a beep. Repeat registration process for any other tags with the other available buttons.
Press the right hand side button to switch on your Loc8tor Lite – the red status light will flash. Press the left hand side (volume) button and simultaneously press the button you wish to deregister. Hold both buttons down for three seconds or until you hear first 1 then 2 beeps. After the 2 beeps, release both buttons. This will deregister the tag paired with button and allow you to register the tag to a different button or handset. Repeat this process holding down the left hand side button and the other handset buttons to deregister tags associated with them.
Remove rubber band going around tag. At the top end of each tag there is a hole which you can thread a lanyard through. At the opposite end there a small space you can insert the tag opening tool (included in pack). Insert tool into space and twist - the tag will pop open. Replace with CR2032 battery keeping plus side face up. Replace the lid by lining up the lanyard hole and pressing shut.
The Loc8tor Lite uses CR2032 batteries, one in the handset and one in each of the tags. They can be purchased from most supermarkets or stores that would sell batteries.
I always fly over fields and lost reciever signal one day . Never found my quadcopter and gopro back (300Euro…).
Did a small investement in a loc8tor . A few months later I crashed again (of course…) lost my LiPo battery , but was able to recover my quadcopter , in a corn field!!!
I will never fly without one again !!!
Fairly cheap (in comparison with a new quad), light and easy to use .
Robby V – :
HI Robby,
thank you for your great feedback.
We are happy to hear that you had such a great experience with our product.
Warmest regards,
Loc8tor team
Valentina Suler – :